To install your Reese slider hitch like # RP30075 in your Ford F-350 with the OEM puck setup you can use Reese Underbed Rail Adapter # RP30156 which you can see in the linked review and install videos. Pricing is shown on the item's page.
Please note that part # RP30156 will add 2-3/4 inches to the height of the fifth wheel hitch with which it is used. view full answer...
You're actually on the right track, here. The TorkLift Custom Frame Mounted Tie Downs # TLF2021 and # TLF2021A (aluminum) are a confirmed fit through TorkLift for the 2020 F-350 with the running boards that extend past the cab of the truck. Since these are available you'll be able to go ahead and order those extended running boards. For rear tie downs, you'll want to use the # TLF3008 or # TLF3008A (aluminum), which are also confirmed for your new truck.
If you also need turnbuckles for... view full answer...
When it comes to purchasing the brackets only without the rails The Custom Mounting Brackets for Demco Hijacker SL Series 5th Wheel Trailer Hitches # DM8553017 is the kit confirmed for your 2022 Ford F-350 Super Duty.
This kit requires no drilling, and has a sturdy, black powder coated steel that resists corrosion. view full answer...
When installing a backup camera on your 2021 Ford F-350 Super Duty The Custom Third Brake Light Camera for 8" Factory Monitor - Night Vision # 3460001 it will allow you to see the back of the truck and use your custom monitor to see what is going on while backing up.
This camera's custom bezel mounts behind your third brake light. You can line up with your fifth wheel or gooseneck trailer using your Ford F-350 Super Duty's factor monitor. This camera only functions when in reverse. it... view full answer...
The Curt PowerRide 5th Wheel Trailer Hitch w/ Rails will include the the Curt PowerRide 5th Wheel Trailer Hitch # C22ER and the Curt Universal Fifth Wheel Base Rails # C99JR. You will need the Curt Custom 5th Wheel Bracket Kit # C99BR to attach to your frame and provide a mounting point for the above bed rails in the back of your 2022 Ford F-350 Dually.
The Curt 5th Wheel/Gooseneck Custom Wiring Harness # C57010 will allow you to add a 7-way connector inside your bed. This will protect... view full answer...
Unfortunately no, the Pin Locks for TorkLift FastGun and Derringer Turnbuckle Handles # TLS9500 will all use the same key, however the TorkLift Tie Down Locks # TLS9700 will use a different set of keys as they are not able to be keyed alike. view full answer...
Based off of my research, your Honda EU3000UIS Inverter has a dry weight of 130.7-lbs.
With that being said, the MORryde RV Generator Slide Out Tray # MR37FR would be the closest we can offer that can work for you. This tray has a maximum weight capacity of 800-lbs, and the tray measures 34-1/4" long, and 22-7/8" wide.
Since your generator measures 25.9" long, 7.6" wide, and 22" tall, this is the closest cargo tray we offer that can fit your generator.
This slide out tray also weighs... view full answer...
We do have some black Furrion Chill AC units that are standalone and come with a wall thermostat! The options below come with a standard distribution panel as well as one with an integrated LED lighting:
Standard
- 13.5K Btu # FR35PV
- 15K Btu # FR23PV
LED Lighting
- 13.5K Btu # FR75PV
- 15K Btu # FR45PV
It is worth noting the LED lighting can be turned off while the unit is still operating so you don't have to worry about a light always being on. view full answer...
If you have a short-bed F-350 you will need to use a sliding type 5th wheel hitch to have enough turning clearance. If your Curt hitch is a slider type made for standard above-bed base rails then all you need is the adapter # RP30156 from Reese. This adapter drops into the pucks and provides the equivalent of above bed rails that accept any brand of industry-standard 5th wheel hitch. view full answer...
No, you will not need to use a spacer. Since the lift ended up being only 1" higher than the factory lift you will not need a spacer like the Lift Spacers for Firestone Ride-Rite Air Helper Springs # F2366 when installing an airbag system like the Firestone Ride-Rite Air Helper Springs # F2550 in your truck. The # F2550 is the correct Firestone Ride-Rite Air Helper Springs for your 2010 Ford F-350.
The Air Command Compressor System # F2610 will work with the # F2550 if you want a compressor... view full answer...
It sounds like you need an Under-Bed Rail and Installation Kit # RP87FR for your 2019 Ford F-350. The Reese puck system is the same as the Ford OEM prep package, although, to be safe you should measure for yourself to verify.
The capacity of this kit will vary depending on if you use the welded on brackets # RP88FR or the bolt on inner brackets # RP27FR. If you use the bolt on brackets # RP27FR then your capacity is 20,000 lbs, and if you use the weld on brackets # RP88FR, then the capacity... view full answer...
For your 2005 Ford F-350 with the Remov-A-Ball your options will be limited. As far as a 5th wheel hitch being compatible with your current system, that isn't going to be an option as there are none available.
What you can do, is use the Convert-A-Ball Cushioned 5th-Wheel-To-Gooseneck Adapter # CAB-C5GX1216
which will lock overtop of the kingpin on your 5th wheel, and hook-up to your existing gooseneck ball.
I should note also, that some manufacturers won't allow this adapter without... view full answer...
For your 2008 Ford F-0350, long bed, the correct replacement tarp for your TruXedo Lo Pro Soft Roll-up Tonneau Cover # TX569601, is the Replacement Cover for TruXedo Lo Pro Soft, Roll # TX569601-CVR.
If you're also needed replacement Velcro you can use # TX1705183, and if you need replacement weather seal, you can use # TX1114731. view full answer...
We do have the passenger side bracket for your Firestone Ride-Rite Air Helper Springs F88ZR on your 2022 Ford F-350!
Along with the Replacement Driver's-Side Upper Bracket for Ride-Rite Air Helper Springs Kit # F2135825872 for the driver side, we also have the Replacement Upper Right Bracket for Firestone Ride-Rite Air Helper Springs # F53FV, which will work for the passenger side. view full answer...
When it comes to replacing your Lippert 1621 HD Pin box on your Heartland RW Road Warrior The Gen-Y Hitch 5th Wheel to Gooseneck Pin Box - Manual Latch - Lippert 1621/1621 HD - 21K - 3.5K TW # 325-GH-8045 will work for you.
This shock-absorbing pin box works with your gooseneck hitch to give a smooth ride while you tow your fifth-wheel trailer. The all-in-1 box has no air bags to refill or small parts to replace.
This pin box has a towing capacity up to 21,000 pounds. It has a pin weight... view full answer...
If where the 7 way connects to the OEM wiring is still intact you can use the Replacement Custom Multi-Tow 7-Way and 4-Way Trailer Connectors # 30955 to quickly swap the connectors out - otherwise you're going to need to essentially start over by cutting the wires behind the damage and splice in the new wiring.
If that's the route than needs to be taken, then you'll want to start with your 4 way wiring # 18252, and use that to give you a new 7-way with # ETBC7. view full answer...
The EcoHitch Hidden Front Mount Trailer Hitch Receiver - Custom Fit - 2" item # 306-X7904 is a confirmed fit for your 2022 Ford F-350 Super Duty and it does not void your warranty. When you install an aftermarket part on your vehicle you are protected by the Magnuson–Moss Warranty Act. This act states, in part, that unless the installation and the part caused a problem then the warranty cannot be voided. So long as this part is installed correctly and the limits not exceeded you will not... view full answer...
I would be happy to help you. You need the B&W Companion OEM 5th-Wheel Hitch for Ford Super Duty Prep Package item # BWRVK3300 for your 2022 Ford F-350 Super Duty with the factory puck system. The Companion is especially designed to attach to the receivers in your Ford's factory 5th-wheel towing prep package. It features a dual jaw for excellent jaw-to-king-pin contact and a cam-action handle for simple release. It also is easy to remove for full bed access.
The B&W Companion weighs over... view full answer...
If you are talking about the Trim Rings # RP58458 on the OEM puck system installed on your 2016 Ford F-350 , which is the same as the Reese # RP30138-26, then there are no trim rings available. We do however have the Cover # RP30136 which plugs of the gooseneck hitch hole when not in use if that is what you are looking for instead. view full answer...
Thanks for the info! We have exactly what your friend needs for their 2020 Freedom Express Ultra Lite.
The part numbers you are referencing belong to the predeccessor to the Furrion Vision S backup camera system but the Vision S system will still work regardless. The FOS48TA-BL was the 4.3" monitor so the exact equivalent to the parts you mentioned would be the kit # FOS43TASF. This comes with both the monitor and the camera so that's all they would need.
It is worth noting that the 4.3"... view full answer...
Go To Results